Replacing a keyless entry lock may seem like a daunting task, but with a little guidance and the right tools, it can be a simple process. As a locksmith at Locksmith Columbus in Central Ohio, I have helped many customers replace their keyless entry locks with ease. In this blog, I will walk you through the steps to successfully replace a keyless entry lock for your home, office, or any other property that requires secure access.
Firstly, it is important to understand how keyless entry locks work. These locks use keypad codes or electronic fobs instead of traditional keys to access the lock. This eliminates the need for physical keys and makes it easier to keep track of who has access to your property. But just like any other lock, keyless entry locks also need to be replaced when they are worn out or malfunctioning.
The first step to replacing a keyless entry lock is to gather all the required tools and materials. These may include a screwdriver, drill, replacement lock, new batteries and a step ladder if the lock is situated at a height. Once you have everything you need, follow these steps:
Step 1: Determine the type of keyless entry lock
There are different types of keyless entry locks such as mechanical, electronic, and wireless. Make sure to identify which type of lock you are dealing with before moving on to the next step.
Step 2: Remove the old lock
Using a screwdriver, unscrew the faceplate and remove the old lock from the door. Make sure to keep all the screws in a safe place to avoid losing them.
Step 3: Install the new lock
Follow the instructions provided by the manufacturer to properly install the new keyless entry lock. This may include programming the lock with a new code or syncing it with a wireless system.
Step 4: Test the lock
Once the new lock is installed, test it by entering the code or using the electronic fob to ensure it is working properly.
Step 5: Secure the lock in place
Using the screws provided, secure the new lock in place. Make sure it is level and aligned with the door.
Step 6: Install new batteries (if needed)
If your keyless entry lock requires batteries, install new ones before securing it in place.
Congratulations, you have successfully replaced your keyless entry lock! This process may vary depending on the type of lock, so it is always recommended to consult a professional locksmith for any assistance.
At Locksmith Columbus, we understand the importance of secure access to your property. That’s why we provide reliable and efficient keyless entry lock replacement services. Our team of trained and experienced locksmiths are available 24/7 to assist you with all your lock and key needs. Give us a call at (614) 585-8955 for any inquiries or to schedule an appointment.
How to Replace a Keyless Entry Lock: A Step-by-Step Guide from Locksmith Columbus
At Locksmith Columbus, we understand the importance of having a secure and convenient way to enter your home or office. That’s why we offer keyless entry lock installation and replacement services to our clients in Central Ohio. Keyless entry locks not only make life easier for homeowners and business owners, but they also provide enhanced security for your property. If you’re thinking about switching to a keyless entry lock or need to replace your current one, we’ve got you covered. In this blog post, we’ll walk you through the steps of replacing a keyless entry lock.
Step 1: Gather Your Tools and Materials
Before you begin, make sure you have all the necessary tools and materials for the job. You will need a new keyless entry lock, a screwdriver, a tape measure, and possibly a hammer and chisel if your old lock was mortised. It’s also a good idea to have someone to assist you, especially if the lock is heavy.
Step 2: Remove the Old Lock
Using your screwdriver, remove the screws that hold the old lock in place. Keep the screws in a safe place, as you will need them later. If your old lock was mortised, you will need to use a hammer and chisel to remove it. Once you have removed the old lock, clean the area and make sure it is free of any debris or old adhesive.
Step 3: Measure and Mark
Now, it’s time to measure the distance between the edge of your door and the center of the lock. This measurement is known as the “backset” and it is important to ensure that your new lock will fit properly. Use your tape measure to get an accurate measurement and mark it on the door. Then, using the template provided with your new lock, mark the spots where you will need to drill the holes for the new lock.
Step 4: Install the New Lock
With the holes fully drilled, it’s time to install the new lock. Follow the manufacturer’s instructions for your specific lock, but in general, you will need to insert the latch assembly into the larger hole and secure it with screws. Next, insert the lock cylinder into the smaller hole and use the screws to secure it in place. Make sure everything is level and in proper alignment before tightening the screws.
Step 5: Test the Lock
After installation, test the lock to make sure it is working properly. Enter your code or use the key to lock and unlock the door. If everything is working as it should, move on to the next step.
Step 6: Reattach the Door Handles
If you have a handle attached to your keyless entry lock, it’s now time to reattach it. Follow the manufacturer’s instructions to properly attach the handle.
Step 7: Program Your Code
Most keyless entry locks allow you to program your own personal code for easy entry. Follow the instructions provided with your lock to program your code. Remember to choose a code that is easy to remember but not too obvious.
Step 8: Secure the Screws
Once everything is in place and your lock is programmed, secure all the screws tightly to ensure your lock is firmly attached to the door.
Congratulations, you have successfully replaced your keyless entry lock! If you encounter any problems during the process, don’t hesitate to contact Locksmith Columbus for professional assistance.
Why Choose a Keyless Entry Lock?
Now that your new lock is installed, you may be wondering why you should choose a keyless entry lock over a traditional key lock. Here are a few reasons why keyless entry locks are becoming increasingly popular:
1. Convenience: With a keyless entry lock, you no longer have to fumble for your keys or worry about losing them. You can simply enter your code or use a keyless fob to unlock your door.
2. Enhanced Security: Traditional keys can be copied, stolen, or lost, making your home or office vulnerable to break-ins. Keyless entry locks eliminate the need for keys, making it almost impossible for anyone to access your property without your code or key fob.
3. Easy Access for Trusted Individuals: With a keyless entry lock, you can grant access to trusted individuals, such as family members, friends, or employees, without giving them a physical key. You can simply give them a temporary code or key fob that can be deleted once they are no longer authorized to enter your property.
Call Locksmith Columbus for All Your Keyless Entry Lock Needs!
At Locksmith Columbus, we are dedicated to providing our clients with top-notch keyless entry lock installation and replacement services. Our team of experienced and certified locksmiths is available 24/7 to assist you with any lock-related issues. Give us a call at (614) 585-8955 for all your keyless entry lock needs in Central Ohio.
577 W Broad St, Columbus, OH 43215
(614) 585-8955