Table of Contents

Locks are important tools in keeping our lives, our families, and our property safe and secure. Unfortunately, on occasion, locks can cause us some difficulties, from something as simple as forgetting a code or a key, to something more technical that requires professional assistance. While everyday lock problems that pop up can quickly be solved with the proper knowledge and tools, more technical lock problems may require the assistance of a professional locksmith. Let’s take a look at some of the more common lock problems and solutions that may require the help of an experienced security professional.

Key is Stuck in the Lock

If you try to turn a key in a lock and it won’t move, you may have a key that is stuck. A common cause for this is the key has become bent or damaged, preventing it from being removed. This could be due to any number of causes, such as excessive use, extreme temperatures, key replacements, and more. In such cases, a locksmith should be called to remove or duplicate the key.

Lock is Jammed

Often, locks can become jammed due to a variety of causes, including moisture, dust, dirt, and corrosion. In such cases, a locksmith can usually disassemble the lock to remove the jam, clean, lubricate, and replace the components in order to make the lock operational again.

Door Lock Won’t Turn

Sometimes, a lock may not rotate when the key is turned. This can be due to a variety of issues and can result in the lock becoming stuck in a position. These types of problems can often be solved by a locksmith, who can disassemble the lock, inspect the parts, lubricate, repair, and reassemble it. In some cases, the entire lock must be replaced.

The Lock is Not Working

If your lock is not functioning as it should, it could be for a variety of reasons. The most common problems include worn out parts, dirt, moisture, and minor misalignment. If you can’t unlock the door, a locksmith can diagnose and fix the problem.

Lost Keys

If you’ve lost or misplaced your keys, a locksmith can help you. A locksmith can use a variety of techniques to either open the lock or replace the lock altogether depending on the type of lock and security level you require.

Installing a New Lock

If you are looking to install a new lock or change the existing locks in your property, a locksmith can assist with this as well. They can help to select the right lock and install it for you, making sure it’s secure and functional.

Common Lock Problems and Solutions from Locksmith Columbus in Central Ohio

Having a good lock on your door is key to your security, whether at home or at your workplace. But, even the most reliable locks can encounter problems over time. This is why it is important to know the common lock problems and solutions so you can fix your locks quickly and avoid bigger damage.

At Locksmith Columbus, located in Central Ohio, we engage in all types of lock changing and repair services. Below are some of the most common lock problems and solutions that we encounter.

Faulty Lock Cylinder

The first common lock problem is a faulty lock cylinder. If your key is not being turned properly or if the lock won’t open even with the correct key, it may be due to a faulty lock cylinder. This is a common issue in older locks, but can also occur suddenly in newer locks too.

The solution is to replace the worn-out lock cylinder so that the lock works properly again. It is important to get a good quality lock and your trusted locksmith can help you out with this. With a good quality lock, you can be sure of better protection and reliability.

Locked Door Knob

Another common lock problem is a locked door knob. This is when the knob on your door refuses to open even with the correct key. There can a variety of reasons for this including an improperly fitted lock or a fault in the mechanism.

The solution to this problem is to try and lubricate the moving parts of the door knob and see if the problem is resolved. If it is not, then you will need to get a better fitting and a higher quality lock if the problem persists. Again, your trusted locksmith can help you out with this.

Tight Locks or Noisy Locks

Sometimes, locks may become too tight that they will not open or close even with the correct key. This is usually caused due to dirt, rust or a worn-out mechanism. The same goes for noisy locks. If you hear an unusual noise when unlocking your door, it’s an indication that the lock needs to be repaired or replaced.

The solution is to try and lubricate the lock and see if that solves the problem. If it doesn’t, then it is best to replace it with a higher quality lock.

Misplaced Keys

This is one of the common lock problems where the keys are misplaced or stolen. If this happens, you may find it difficult to unlock your doors and also your security is compromised.

The solution in this case is not to try and open the locks yourself, as this can cause further damage. You should contact a locksmith and they can then help you out with an emergency lock change service.

At Locksmith Columbus, our team of experienced technicians can get your locks replaced quickly and help restore your safety and security.


The problems related to locks can be difficult to solve sometimes, but with the help of your trusted locksmith, you can get the job done quickly and keep yourself and your belongings safe.

So, if you encounter common lock problems in Central Ohio or in the surrounding areas, don’t hesitate to give us a call at (614) 585-8955 and we’ll be there to help you out.

At Locksmith Columbus, we strive to make sure that you have the best locks around for maximum security and peace of mind. So, don’t hesitate to get in touch with us when you need help with locksmithing!

Related articles:

Lock installation Columbus Ohio
Tips for Installing Residential Smart Locks

Contact Details
© 2023 Privacy Policy

© 2023 Privacy Policy